Product Description
Linder imitation stone paint is a kind of high-quality high-grade exterior paint with excellent comprehensive performance developed by today’s advanced coating technology with different particle size of natural granite and other natural colored stone, stone powder as the main material, synthetic resin or synthetic resin emulsion as the main binder. The protective layer formed on the surface of the wall has strong weather resistance and can withstand the sun or rain for a long time, comprehensively solving various wall problems.
Product Features
Water-based natural color
No bleeding, uniform color
Hard coating, strong adhesion
Good anti-fouling, acid and alkali
resistance.
Realistic effect, strong sense of
three-dimensionality
Low carbon and environmental protection,
non-toxic and harmless
Anti-cracking, corrosion resistance
Construction process
Construction method: spraying (some categories can also be scraped)
Requirements of base layer
The base should be solid, flat, clean, dry (water content ≤10%), neutral (pH value ≤10).
(The actual amount of paint used may vary due to the influence of different factors, such as the application method, construction tools, modeling effects, conditions of use and flatness of the surface to be coated, etc.).
Recoating time
Surface drying ≤2 hours/25℃ -Solid drying: 7 days/25℃ -Repainting: ≥2 hours
It must be matched with sealing primer and overcoat topcoat to ensure the construction quality and the weather resistance of the wall surface.
Maintenance time
7 days/25℃: low temperature (should not be lower than 5℃) appropriate extension, in order to obtain the ideal film effect.
Construction conditions
Please do not construct in wet or cold weather (temperature <5℃, relative temperature >85%), otherwise the expected painting effect cannot be achieved.
Cleaning
When stopping in the middle of painting and after finishing, please wash all the instruments with water in time.
substrate treatment
| surface treatment | Remove surface dust, grease and loose plaster from new walls, repair any holes in time and ensure that the walls are clean, dry and level. | Repainting the wall to remove the old wall not solid paint film, remove surface dust chalk and impurities, batch leveling and sanding, clean and thoroughly dry. |
| surface state | Ensure that the surface humidity of the pre-coated substrate is <10% and the pH value is <10. | The surface of the pre-coated substrate must be firm, dry, clean, flat and free of loose material. |
Coating system and number of coats
| Painting System | primers | top coat |
| Construction method | Linder Multi-Functional Anti-Alkali Sealing Primer” once more | “Linder Stone Paint” 2 coats |
Safety matters
Please be sure to read the construction instructions of the product package carefully before use, in order to obtain reliable and satisfactory painting effect;
Open all windows and doors as much as possible before starting operation and use to ensure that the construction area has sufficient ventilation;
in case of allergic skin, always wear protective gears during use; in case of inadvertent contact with eyes, rinse immediately with plenty of water; in case of inadvertent contact with skin and causing persistent pain or irritating sensation, rinse immediately with plenty of water and seek medical assistance;
Do not allow children or pets to enter the construction area and keep the product out of their reach; if accidentally contaminated with children, immediately flush with plenty of water and seek medical assistance;
Do not pour paint into sewers or drains;
dispose of paint waste in accordance with local environmental standards.
Storage
Store tightly closed in a cool and dry place at 0-40℃.
Shelf life: 12 months
