Product Description
Linder quality architectural coatings have decorative function, protective function and residence improvement function.
The decorative function is to improve the appearance value of the building through beautification; the protective function refers to the function of protecting the building from the influence and damage of the environment, and the content of the protective function requirements varies for different kinds of protected bodies; the occupancy improvement function is mainly for indoor painting, which is the function that helps to improve the living environment.
Product features
Convenient construction
Strong decorative properties
Good protection function
Excellent environmental performance
Good adhesion
Strong weather resistance
Construction process
Construction method: brush, roller, spraying
Substrate requirements
The base should be solid, flat, clean and dry.
Dilution
Dilute with ≤10% water depending on the construction condition, excessive dilution will affect the color and coating life.
Stir well before use.
Recoating time (in terms of dry film 30 microns, 25~30℃)
Recoating: ≥2 hours
Maintenance time
7 days/25℃: low temperature (should not be lower than 5℃) appropriately prolonged, in order to obtain the ideal paint film effect.
Construction conditions
Please do not construct in wet or cold weather (temperature <5℃, relative temperature >85%), otherwise the expected painting effect cannot be achieved.
Cleaning
When stopping in the middle of painting and after finishing, please wash all the instruments with water in time.
substrate treatment
| surface treatment | Remove surface dust, grease and loose plaster from new walls, repair any holes in time and ensure that the walls are clean, dry and level. | Repainting the wall to remove the old wall not solid paint film, remove surface dust chalk and impurities, batch leveling and sanding, clean and thoroughly dry. |
| surface state | Ensure that the surface humidity of the pre-coated substrate is <10% and the pH value is <10. | The surface of the pre-coated substrate must be firm, dry, clean, flat and free of loose material. |
Coating system and number of coats
| Painting System | primers | top coat |
| Construction method | “Linder Multi-Functional Anti-Alkali Sealing Primer” once more | “Linder Quality Architectural Coatings” two times |
Safety matters
Please be sure to read the construction
instructions of the product package carefully before use, in order to obtain
reliable and satisfactory painting effect;
Open all windows and doors as much as
possible before starting operation and use to ensure that the construction area
has sufficient ventilation;
in case of allergic skin, always wear
protective gears during use; in case of inadvertent contact with eyes, rinse
immediately with plenty of water; in case of inadvertent contact with skin and
causing persistent pain or irritating sensation, rinse immediately with plenty
of water and seek medical assistance;
Do not allow children or pets to enter the
construction area and keep the product out of their reach; if accidentally
contaminated with children, immediately flush with plenty of water and seek
medical assistance;
Do not pour paint into sewers or drains;
dispose of paint waste in accordance with
local environmental standards.
Storage
Store tightly closed in a cool and dry place at 0-40℃.
Shelf life: 24 months
